[tire wear]

get an alignment

[Let me have it]

i already know im going to get tons of people saying sell my truck and buy a short bed but im not going to i like this sort of project so thats what im going to do

i know i need:

drive shaft

brake lines

short bed

my question is how much do i need to section from the frame when i cut it for the notch i planned to put the notch in place as if i were going to bag it as it sits weld half of it in place so i know its even and straight and then section out a given amount to shorten it and then tack it in place to make sure everything is a go then finish off the weld

please be serious about your answer

thanks

[SA-8s and Team Sundown]

thanks

[SA-8s and Team Sundown]

Jacob, I ordered 2 SA-8s maybe a couple months ago and I was reading the facebook fan page and I noticed that there have been improvements to the line. I was wondering if mine where included in that. I plan to buy 6 more in the near future and I don't want to be mixing or anything... which brings me to my next point, Are there any openings on Team Sundown for 2011? I am the only person in my area that I am aware of that even knows what sundown is. I would love to rep. your product up here in 18711. I've been trying to get in the show scene for a while but I was set back with my last build by a transmission failure, but now I have a new reliable vehicle and I'm more than excited for shows. (Carlisle being 1.5 hours away )

[RCA'S]

are you talking about using a splitter or running a pair to 1 amp then from that amp to the second?

[09 silverado build]

SA-8s ftw im doing a blowthrough with 8

[Need Help On 2 Oldschool rf 18's same as steves tahoe first system]

that price sound fair for the jackhammers but you cant sell them here till you have 50 or 100 posts i cant remember which one as for the other question you had i would almost try selling those subs to a collector or something and buying new stuff just my.02

[D975 is it ok that it rests @ 12.8 volts after charge?]

charge it before you install it youll be good

[2 SA-12s...]

[quote name=BeachJoshua' date='17 January 2011 - 10:32 AM'

timestamp='1295285532' post='1357262]

Wait... He's running a 3000D at .5 ohm these subs say 600 rms.

there is a crx with 2 SA-8s that does

150.xx on a 3500

What's his box tuned to? Keep in mind I plan to run this power daily and play lows.

im not sure what the box was tuned to but when it did the 50 i think it was at 51hz iirc

i know your planning a daily system i was just proving a point Power

does not blow speakers, CLIPPING does

fixed for you ^^

you knew what i meant

[Audioque website]

they just updated a bunch of stuff that might be why its down

[2 SA-12s...]

Wait... He's running a 3000D at .5 ohm these subs say 600 rms.

there is a crx with 2 SA-8s that does 150.xx on a 3500

What's his box tuned to? Keep in mind I plan to run this power daily and play lows.

im not sure what the box was tuned to but when it did the 50 i think it was at 51hz iirc

i know your planning a daily system i was just proving a point Power does not blow speakers, distortion does

[2 SA-12s...]

Wait... He's running a 3000D at .5 ohm these subs say 600 rms.

there is a crx with 2 SA-8s that does 150.xx on a 3500

[1/4" bolts and nuts]

are they smaller than 1/4 and how many do you have

I have 50 of each, wanna keep like 30 of each. And yeah i think so, if you want i could send links to where i bought them. Might be easier/cheaper.

it would be easier if you just bought these outright then i went to parts express and ordered the amount that i need (i need 64 or each)

$10 shipped

[1/4" bolts and nuts]

Nuts

Bolts

Can send a bit with.

are they smaller than 1/4 and how many do you have

[1/4" bolts and nuts]

what screws would anyone recommend if i didnt use bolts the screws i use dont really cut it

[1/4" bolts and nuts]

measure the hole on the woofer.. i would think something around 1/8 " bolts would work

but my i ask why bolts and not screws? lol

no reason i like the look of the bolts

[1/4" bolts and nuts]

How much shipped to 19438?

really just want smaller bolts ill sell them if you can tell me what size i should be able to find at home depot or autozone etc....

[1/4" bolts and nuts]

hmm, i am wondering if i could use these for bolt terminals, just might be too long i think

they would be perfect for terminals if they are too long use washers

[1/4" bolts and nuts]

they are 2.5" long and the head is a 11 or 12mm hex ( i cant remember)

as stated in the title they are 1/4 and they wont fit through the basket on my SA-8s if you have something that is smaller that will fit through the hole let me know thanks

[need some opinions...sub choices]

check out audioques stuff

this

[Post your Rig]

mine

specs:

cosmos s case

core i7 920

asus rampage III extreme

XFX ati radeon 5770

wifi card

tv tuner

LG blu ray burner

coolermaster ultimate 900w power supply

1 TB WD caviar black X's 2

32 GB Patriot Warp v2 X's 4 (raid 0)

8 fans

cold cathode

[Future Suburban Build (Blueprint pics)]

they are nice sketches.....

[Team Sundown Russia - Mazda 3 MPS]

fucking right sundown ftw

[4th or slot vented enclosure question]

if you do have the skills the 4th order will definitely give you LOWS im working on one myself

[L5 or type r]

of the choices type r